2017年9月22日星期五

How to use Iscancar VAG MM-007 Change 4th IMMO UDS Instrument?

Iscancar VAG MM-007 English/Chinese version is in stock now.And MM-007 can support controller diagnostic, such as basic setting, channel adaption, read DTC, clear DTC, system login .etc
VAG MM-007
1.Firstly,it will request PIN and CS information to input into new instrument, you can get it via Iscancar VAG MM-007 to read by OBD from the engine or IMMO system to read.
xhorse vag mm-007
2.Enter the new PIN, CS1 (6 bytes CS in the engine), CS2 (another 6 bytes CS), in general,the IMMO system will display all the data, power level (the value in IMMO and the engine system needs to the same).

3.Enter new VIN and IMMO code.
Xhorse Iscancar VAG MM-007
4.Confirm the data is right or not.

5.If all the data is right,the dashboard will display new information for PIN,CS,VIN.etc.
6. Instrument matching is completed, the dashboard will display 0-0, then need to learn the key and synchronous engine, you can complete it with VAG MM-007 too.

2017年9月19日星期二

How to use VVDI MB Tool Renew Benz X164 CR4 ECU?

VVDI MB BGA Tool can do Benz ECU/Gearbox renew function.And in previous,we display renew gearbox,now here is some photos to display VVDI MB Tool Renew Benz X164 CR4 ECU.
1.Connect VVDI Benz with ECU and computer.
vvdi benz ecu renew
vvdi benz ecu renew
2.Choose ECU,and then click "Read"
vvdi benz ecu renew vvdi benz ecu renew
Reading data processing,please wait.
vvdi benz ecu renew
3.Read successfully.Get Erase password,then renew.
4.After renew,read ECU again,it shows information like following:
Initialized: Yes
TP cleared: NO
Personalized: No
Activated: No
vvdi benz ecu renew
Some customers may ask the VVDI MB Tool ECU/Gearbox support list,it does not have specific one,you can choose ECU connect test to read,if can be read,it will be supported.

 original:How to use VVDI MB Tool Renew Benz X164 CR4 ECU?

How to use Condor XC-MINI Key Cutting Machine Cut Lexus Key?

iKeycutter ikeycutter condor xc-mini Master Series Automatic Key Cutting Machine is with 3 years warranty,and can do multi-brands car models,we display how to cut key by key code and key by bitting in previous blog,and this new blog is about cut Lexus key.
1.Find the key code on Lexus car door.
condor xc-mini
2.Start Condor mini key cutting machine,and choose "key database".
condor mini
3.Choose Lexus car brand,and input the key code.
condor mini
condor mini
4.Then it shows the clamp you need to use.Put the M2 clamp and new key blade.Press CUT.
MINI CONDOR
condor xc-mini
5.After cut one side,change to another side.
condor xc-mini lexus
6.Key cutting process finish.Test Key on door.

condor mini

 original:How to use Condor XC-MINI Key Cutting Machine Cut Lexus Key?

How to use VVDI MB Tool Program Benz W220?

VVDI MB BGA Tool can do different Benz car models,and in the list it can support to program keys for W215, W220.Here this blog will display about VVDI MB Tool program Benz W220 key.
1.Start VVDI Benz software,connect VVDI MB with computer,insert IR adapter into car.
vvdi mb tool
2.Choose EIS Tools and IR mode.
vvdi benz key programmer
3.W220 chassis.
vvdi benz w220
4. Click "Read EIS Dada and Password"
Insert IR adapter to car.Take out and insert again.Remain 30 seconds.
vvdi benz w220
5.Reading data,then it shows:read password via IR,click Yes to continue.
vvdi benz
6.After read password successfully,it will display automatically.If it fails,please try other way to get key password.
vvdi mb tool w220
7.Click "Save EIS Data",save the data.
vvdi benz w220
8.Click "Prepare Key File",then "Load EIS File"
vvdi benz
9.Paste the key password you have read in step 6.
vvdi benz key programmer
10.Choose the key number,and then "prepare key file".
vvdi benz w220
11.Click "Read Write key" in vvdi mb tool software.Then identification key.
12."Load key file".
vvdi benz
13.Writing key successfully.

2017年9月18日星期一

How to use VVDI MB BGA tool change EIS For MB 207 all key lost

About Mercedes Benz 207 all key lost, you need to change EIS
Tools you should buy - VVDI MB BGA TOOL:
Support all key lost
Mainly used for key reading and writing,EIS tools,password calculation,key file preparing,ESL tools,ECU/Gearbox renew and many special functions
support renew EIS and ELV,support write EIS and ELV
More Detail functions:
http://www.xhorsevvdi.com/wholesale/xhorse-vvdi-benz-vvdi-mb-bga-tool.html
Steps?
Firstly, we need to read EIS old data.
  1. Click "Read EIS data", tick off "allow user", then enter Key pass, then click "Save EIS data" to the "207 all key lost" folder, follow the prompt to finish the following procedure.

  1. Prepare key file. Click "Load EIS file" then "Prepare Key File"

  1. Make new key.
1) Click "Read Write Key" and insert key into EIS;
2) Click "Identification key", reading data success and you will see key is unuse, it is a new key.
3) Click "Load key file" and select "Key1_801DDA38_used_015" to open.
4) Click "Write". Writing success and click "Identification key"

5) Change EIS.

6) Click "Read EIS data", you will see the key1-key8 is new. Then click "Load EIS data"

7) Choose EIS VIN again and click "Write", click "Read EIS data" and remove the tick before "Activated", then insert new key into the EIS.

8) Click "Read EIS data", meanwhile tick off "Activated", you will see Key 1 is used.
Okay, the Xhorse VVDI BGA tool changes EIS successfully.

2017年9月12日星期二

Free Download V4.5.0 VVDI2 Key Programmer Software (2017-09-08)

V4.5.0 VVDI2 Full software update is OK Sep 8th,some customers gave feedback that link is not OK to download,you can check on vvdi2 older version to get newest version,or you can download from the link we offer now,tested OK to download.
vvdi2 update vvdi2 update
1.Free Download V4.5.0 VVDI2 Key Programmer Software (2017-09-08)
https://mega.nz/#!q1RmQDwA!Kj_eZqe-IWxsGMnQF7Dc5mw5TKKFXPC132SNxXoa27w
2.V4.5.0 VVDI2 Update Information(2017-09-08)
Require firmware V4.5.0
Note:
1. All customer should update the software to V4.5.1, use the latest software to synchronize your device
2. Update firmware v4.5.1 require the latest online update tool v4.5.0 version
3. Please download latest install software first then update firmware
BMW V4.5.0
1. Improvement for BMW FEM/BDC key learn
2. Bugfix
Transponder Programmer V4.5.1
1. Add online points system(Menu->Points System->Online points system)
2. Bugfix

2017年9月9日星期六

How to use VVDI MB Program Benz 2013 E260 All Key Lost

VVDI MB BGA Tool Benz key programmer,support All Key Lost:w204, w207,W166, W246, W212, W212(old),some W216, W164 2009- future will add more.And now we display detailed steps VVDI Benz 2013 E260 All Key Lost.
1.Read EIS data,and save the data it reads out.
vvdi benz all key lost
vvdi mb tool
2.Get "Key Password".
Password Calculation.Choose IR model,and choose detailed chassis.
vvdi mb bga tool
Connect device OBD line to car.
Connect IR adapter to VVDI MB Tool.
Data Acquisition.
Save acquisition.
vvdi mb
vvdi benz
3.Prepare Key File.
Copy the key password from Step2.
And click "Prepare key file",then "Load EIS File" from step1 saved.
vvdi benz e260
Paste key password,and choose Key number.Waiting the prepare key file process.
vvdi mb bga tool
Save key file.

4.Write key.
Load Key File.After load key file,click write.
vvdi benz
vvdi benz