VVDI2 VAG v5.2.5 on MQB key programming feedback Yes and No

Here VVDI2 VAG v5.2.5 feedback on VW MQB NEC35XX key programming.
Ok...

1. I have use VVDI2 VAG v5.2.5 Done 2016 a3 (MQB system) works like a charm. Cars after 2014 07 r supported except jc and virtual cockpit.
2. VVDI2 programsVW MQB NEC35XX Smart Key

Procedure: http://blog.xhorsevvdi.com/how-to-use-vvdi2-to-program-vw-mqb-nec35xx-system-smart-keys/
Claimed VVDI2 VAG MQB support list:
VAG V5.2.0 =====

1. Improvement MQB NEC35xx immobilizer/KM function, support following cars:

Audi A3/S3 2014+
Audi Q2
VW Golf7
VW Polo(MQB)
VW Tiguan II
VW Touran II
VW crafter 2017+
VW Passat B8 without virtual cockpit
Skoda Octavia III 2014.07+
Skoda Rapid 2015.06+
Skoda Kodiaq
Skoda Superb III
Seat Ibiza/Ateca/Toledo 2015.06+
VAG V5.2.1 update on MQB:

1. Bugfix for access some MQB(Continental/VDO) instrument
2. Improvement for prepare MQB dealer key: Now we support all original blank key or MQB key made by VVDI
3. Improement for MQB key learning

Failure...
Vvdi2 cannot read eepromb immo data from audi a3 2013 mqb with keyless go. Because cars before 2014 aren't supported...
Here is screen shot.

Using tips:
Tip 1:  This type only support cars with cluster Continental/VDO. JCI type and virtual cockpit was not include
Tip 2: Improvement for prepare dealer key: support original blank key and MQB key made by VVDI
Tip 3: MQB Immobilizer function require extra license. Customer who have copy 48 (96 bit) license will get MQB license for free
Tip 4: Improvement for key learn function
Tip 5: Bugfix for access some MQB instrument
Tip 6: Only supports MQB key add not support all keys lost.
Edit by Xhorse VVDI

How to use vvdi BE key pro version to change frequency 315MHZ or 433MHZ?

vvdi BE key pro improved version supports changing key frequency between 315Mhz and 433Mhz with VVDI MB tool software or who don't have this tool, always in this way with PCB resistor.
Option 1: change key frequency 315 MHZ or 433MHZ with PCB resistor
This a new VVDI BE Key Pro Improved Version

Put the VVDI BE key into the device programmer of VVDI BGA tool to test the key frequency.
This is a complete new BE key unused.
Test the frequency with VVDI key tool, it is 315MHZ.
Here is a square resistor marked with "FRE", just remove it.

Put the BE key into the VVDI key tool to read out 433MHZ frequency.
Youtube video:
Coming soon
Option 2. change key frequency 315 MHZ or 433MHZ with VVDI MB tool
Open VVDI MB tool, Enter Menu -> Other functions -> reset key frequency.
00:14 - 00:018 : Click on " Read out key frequency", the result is 315MHZ.
Put the VVDI BE key on the top of the VVDI KEY TOOL and the key frequency is 315MHZ.
Insert the VVDI BE key into VVDI MB tool.
Choose" 433MHZ" then "Change key frequency", reset successfully.
Put the VVDI BE key on the top of the VVDI KEY TOOL and read out 433MHZ.93.
Insert the VVDI BE key into VVDI MB tool and you can see " the key frequency is 433MHZ.93", click "OK" to confirm.
Explanation to the option "through PCB resistor". who don't have VVDI MB tool, then change the key frequency through PCB resistor.
Youtube video:
Coming soon
vvdi BE key pro improved version for sale
http://www.xhorsevvdi.com/wholesale/xhorse-vvdi-be-key-pro-for-benz-xnbz01ch-remote-key-chip-improved-version-9180.html



 

Edit by Xhorse vvdi

How to use VVDI2 to program VW MQB NEC35XX system smart keys?

Need:
1) Xhorse VVDI2 VAG V5.1.0
2) Original blank key or MQB key made by VVDI2
3) MQB Immobilizer function require license (Customer who have copy 48 (96 bit) license will get MQB license for free)
Instruction:
Step 1: Automatic recognition system.
Open VVDI2 V5.1.0, select the option "VAG"
The computer is communicating with the device, please wait...

Turn on the dashboard

Click on "Diag"

Click on "Read EEPROM/FLASH", then NEXT.

Step 2: Read EEPROM
Click on "OK"

Start Security login...(you can see at the left corner of the window)

This is Smart key, click on "OK"

Reading data, please wait...Both the EP data and IMMO data need to be read out.

Read eeprom data successfully, click on "Save File" save as name "ep"

Step 3: Read IMMO data and save.
Click on "Read IMMO data".

Save IMMO data successfully

Step 4: Use New key prepare dealer key.
Click on "Make dealer key".

Tick on "Prepare normal dealer key", then "Next".

Get message "Warning: If you make dealer key with normal key, it doesn't support online change immobilizer.
Follow units will not support online immobilizer :
01- Engine
02- Gearbox
17- Instrument
19- CAN gateway
2B - electronic steering column lock
Advise you choose the option "OEM", OEM dealer key have same ID with original one, support online operation.
Continue Prepare normal dealer key?
Click on "Yes" to continue.

Are you sure you want to generate Audi normal dealer key?
Please make sure the make is correct, if you choose wrong, please return back to choose again.
Click on "Yes"

Put the original key into the VVDI2 antenna then click on "OK" to confirm.

Please input the original new MQB key into the VVDI2.

Step 5: Perform Key learn
Use "Reset Instrument" to active instrument after all the operation is finished."

Get message "Note: before learning the key, please firstly save EEPROM and IMMO data (Important), If you have already backup you can continue, otherwise please backup EEPROM and IMMO data first. "

The first one key is learned successfully, you can see 1-2 on the dashboard.

To learn the second key. Insert the dealer key into the car and switch on for at least 2 seconds. The time for change key should smaller than 5 seconds, press Okay button after all keys are learned.

Click on " Okay"

Learn succeed, you can see 2- on the dashboard.

You see the left corner status " All keys successfully learned"
Pull out the key from the ignition to test it can start the car.

Done!
VVDI2 programs VW MQB NEC35XX system smart keys successfully.
Credits to Xhorse team.
For orginal Xhorse VVDI2 device at good price, browse xhorse vvdi or contact email at sales@xhorsevvdi.com
Xhorse VVDI2 Copy 48 Transponder (96 bit) authorization $250 + Free MQB license
http://www.xhorsevvdi.com/wholesale/vvdi2-copy-48-transponder-96-bit-authorization.html
VVDI2 full version Chinese New Year on sale
http://www.xhorsevvdi.com/wholesale/vvdi2-key-programmer.html

VVDI2 full version got error when update BMW(Solved)

VVDI2 full version got error when update BMW shown as below.

Attention: VVDI2 database file released newest version V1.0.0. Please update your software with VVDI2 update tool.
VVDI2 database file lower version may cause some function failed. We strongly suggest you update to latest database file!
Here xhorsevvdi offer solution.
Download BMW configuration file on Mega
https://mega.nz/#!yp5V0LgC!Jmne3SOWP01UgzGmuUMKMWHeiy1uGFBq83T50k2-LhU
Install it.
The problem will be solved.
Good luck!
If you have any more question, welcome contact:
email: sales@xhorsevvdi.com
Skype: xhorsevvdi.com
Whatsapp: 0086-13983756354