2018年6月29日星期五

VVDI2 Works on Skoda Octavia 2015 MQB Mileage and Key

VVDI2 can support MQB KM function free,and later time MQB Key Learn function will be added free in item NO. HKSV86 VVDI2 Key programmer(full version),no need to add ID48 96bit function to get MQB Key Learn.But ID48 two authorization still needs to buy separately.And here we will display VVDI2 works on MQB both KM and key function.
1.How to use VVDI2 do Skoda Octavia 2015 MQB Mileage
Start VVDI2 VAG software,Select Key Learn->MQB platform instrument immobilizer->Instrument with NEC35xx (Continental/VDO)
Click on Diag to load vehicle information.Instrument type: MQB NEC35xx Continental VDO.
Click on read KM


Input the km you want to change,then click write.

Click to continue.

You can save it first.

Switch ignition on with working key before press OK. If car has Keyless Go, put the working key nearly car coil and switch on.

Choose security login: Login Method 2 (because software version of the dashboard belong to 2210)

Write successfully.
Use Reset instrument to active instrument after all the operation is finished.


Reset success.End.
2.How to use VVDI2 Program Skoda Octavia 2015 MQB Key
VVDI2 VAG software,then Key Learn->MQB platform instrument immobilizer->Instrument with NEC35xx (Continental/VDO)
Diag to get car info.

Click "Read EEPROM/Flash" and save data.

Switch on with working key before press ok.If car has keylessgo,put the working key nearby car coil and switch on.

Choose Login Method 2, dashboard 2210.

1. The dashboard is dark when you see this tips. You need finish all operation before reset instrument.
2.Read EEPROM and save it.
3.Read IMMO data and save it.
4. Prepare a dealer key (You can go to step 7 if have working key aslo
don’t want to add key)
5. Reset instrument
6. Add key use immo data to learn the new dealer key to car
7. Finish other customer requests.
Click OK to continue.

Click on Read Immo data and then save it

Select Maker Dealer Key->Skoda
Prepare OEM key:need special key or OEM key,you must provide an original key ID to prepare OEM key,the OEM key can do online operation,OEM key can start engine directly for 4th immo system.For 5th immo ssytem need learn again.

Click "Check working key position"
Input exist working key to programmer.The key position will gray once detect success.

Click Yes to continue.

Input original working key to VVDI2 and press OK.

Input OEM key to programmer and continue.

Use Reset Instrument to activate instrument after all the operation is finished.

Click Reset Instrument ,then add key.


Select Learn key,login with security code from IMMO data.Then press "Load IMMO Data",load the data you save before.

Choose yes,car has keyless.

Click yes.
Put the dealer key nearby car ignition switch and switch ON dashboard before continue.
Test the remote control and start car.

 

Edit by xhorsevvdi.com:  VVDI2 Works on Skoda Octavia 2015 MQB Mileage and Key

2018年6月26日星期二

BMW CAS3 key programming by VVDI2 FULL or VVDI2 BMW both OK

Do you want to know how to program a new BMW dealer key CAS3/CAS3+ by VVDI2? Both VVDI2 FULL and VVDI2 BMW are tested OK! Below a step-by-step guide for checking.
BMW key programming, choose VVDI2 FULL or VVDI2 BMW?
Here is a VVDI2 user opinion:
I voted for VVDI2 Full for VW/Audi/BMW/Porsche. Because I meet most VAG and BMW car key programming in daily work. And VVDI2 FULL has all authorization incl. VAG 5th IMMO, no need to pay anymore in future!
I bought it for $2045 free delivery at xhorsevvdi.com, price is good.
But if you need a lower price VVDI2 and just focus on BMW, I know there is another option: VVDI2 BMW Cas3 basic version.
How to program BMW CAS3 key by VVDI2 key programmer?
https://youtu.be/rmr_IBrQlOw
Below I will talk about is the procedure VVDI2 make BMW key:
First connect VVDI2 with car and use the old key to turn ignition on. Open the software when I click Connect it automatically show me car information and “connect OK”.

Click Key Learn

Click Get Key Info and I see two options: one add key, one lost all key. I choose Add Key then NEXT.

And it says the dealer key should be taken away. So pull out the old key and I click OK.

  1. It read out all key information. I click Save Key Info below to save the original key data.

Next I choose KeyID3 and click Prepare dealer key with programmer.

It asks me to put new key into programmer. So I put the new key into VVDI2 coil.

Then it asks if the key has keyless, I say no.
  1. New key is made but locked. So as the tips I use the key to start car.

Yes. Car starts successfully as I expected!
My vvdi2 full version wins!
 

 This is Edit by Xhorse vvdi:BMW CAS3 key programming by VVDI2 FULL or VVDI2 BMW both OK

Xhorse VVDI PROG EEPROM Clip Adapter Probe Instruction

Starts with a question saying
About ..."Xhorse EEPROM Clip Adapter for VVDI PROG"
Depends on PCB whether need to use PROBE !
1. What PCB need to use probe ?
2. There are two wire to probe (red & brown). Do I use both of this or one ?

Explanation:
  1. If you cannot read with clip alone then you need to use PROBE wires.
  2. Both. One to GND other to PCB's MCU's XTAL pin if there is one.
Question:
Both wires have mark "GND" !! I made picture 1.
On my picture 2 - one of "GND" (brown) I connect to probe and...to PCB's MCU's XTAL pin if there is one.
Another wire "GND" (red) - where ??
Answer:

Professional solution:
Second wire to GND!!! ALL PCB's have GND.
Question:
Ops ! We connect PCB-s GND with "MCU's XTAL pin" through probe !! is it correct ? Like picture ?

Answer:
Yes and also the programmers adapter!
BTW, I not need use connected any other wires then clip only...and work very well....24c02, c04,c16, 5P08 and others...
VVDI Prog Adapter
For vvdi prog

2018年6月25日星期一

VVDI2 BMW+CAS4 authorization plus VVDI PROG FAQ

One beginner asked some questions on VVDI2 BMW+CAS4 authorization plus VVDI PROG and answered by xhorsevvdi.com engineer, they must be useful for more and more beginners, so I'd like to share here.
Question: What product do I need to edit/ correct mileage in BMW (e-series, f-series - CAS3,4, FEM/BDC) and clusters ?
I have found this:
http://www.xhorsevvdi.com/wholesale/vvdi2-bmw-cas4-authorization-and-vvdi-prog.html

Answer:
Yes, you are recommended to use VVDI2 BMW+CAS4 authorization plus VVDI PROG bundle package.
Which aspect you want to know?
Question:
1] to change KM is enought , to modify CAS and clusters? other ECU in car will take km from CAS?
2] Which BMW needs to desolder eeprom (CAS or clusters) - only F-series?
3] its only up to CAS4 module, so If I will need to modify odometer on cars with FEM/BDC module, it will be enought to buy some sw/firmware upgrade - which you will send me, and thats it?
4] when I would like to modify the BMW  G-series , it will be still possible with bought HW - viz the URL? and again, only new software/firmware will be needed?
5] Will the VVDI come with some tutorial, how to modify mileage of car?
Thank you
Answer:
1.Some BMW cars needs to modify both.
2.CAS4 ,F series,EWS needs to read eeprom dump file,you can check the pic:

  1. .If you need BMW FEM,add extra 200USD is OK.
You can go to:
http://www.xhorsevvdi.com/wholesale/vvdi2-bmw-fem-bdc-function-authorization-service.html


  1. BMW G series, how about its immo system? if ews, cas, fem, it will support.
  2. VVDI2 BMW has the manual, but for km function not have specific one. And on youtube there are videos for vvdi2 bmw.
1) Here Newest VVDI2 BMW user manual free download
2)  How to use VVDI2 and VVDI PROG Adapter Program BWW BDC All Key Lost
https://www.youtube.com/embed/wViRBtdIOzs
Question: If I need to correct KM / mileage on cas4 or fem , it has to be done also on eeprom on cluster instrument. Do I have to buy also VVDI programmer, or only VVDI2 key programmer(full version) ?
Answer: for CAS4,we have said, immo or change km both need to use vvdi prog to read dump file.
Maybe BMW FEM also need platform cable to work stably.

Youtube: How to use VVDI Prog to read CAS4 5M48H
https://www.youtube.com/embed/RFLjznhWscM
VVDI PROG And VVDI2 Program BMW EWS4.4 X3 2007
https://www.youtube.com/embed/gPojiEGNEvY
www.xhorsevvdi.com

2018年6月19日星期二

VVDI MB Tool and VVDI Prog with EZS Adatper Program Benz W211 All Key Lost

VVDI Prog Plus VVDI MB Tool can support to do Benz W211 all key lost,vvdi prog read W211 eeprom dump file,and VVDI MB Tool load the file to add new key. And we have Benz W211 EZS adapter to work with VVDI Prog, no need to solder, can be easier to read dump file.
vvdi mb w211
vvdi prog ezs adapter
1.Use VVDI Prog and EZS Apdater to read W211 dump file
VVDI Prog software choose right type, check connection diagram.
vvdi prog w211
Connect VVDI Prog with EZS adapter,VVDI Prog with computer.And supply 12V power.
vvdi prog w211
vvdi prog w211
vvdi prog w211
vvdi prog w211
Click read,and after read succesfully,save the data.
vvdi prog w211
vvdi prog w211
2.VVDI MB Tool Program New Key
Open VVDI MB Tool software, choose "Prepare Key File"
vvdi mb tool w211 all key lost
Load EIS file.
vvdi mb tool w211 all key lost
Choose key version,and click "Prepare key file".Processing prepare key.
vvdi mb tool w211 all key lost
All key files  now save at EIS folder. Choose Read Write key check BE Key whether is unuse staus.
vvdi mb tool w211
vvdi mb tool w211
Load key file.
vvdi mb tool w211
Choose key file unuse one to write new key.
vvdi mb tool w211
Writing data successfully.You can test the new key.
vvdi mb tool w211


vvdi mb tool w211 

 This is Edit by xhorse official website:VVDI MB Tool and VVDI Prog with EZS Adatper Program Benz W211 All Key Lost