V5.0.4 Condor XC-MINI Key Cutting Machine New Version

V5.0.4 Condor XC-MINI version is relased on Apr 19th,and use Xhorse update kit software to update your condor mini key cutting machine.And we received some feedback that when update,it occurs some server or failed error,please try again later and update.

V5.0.4 Condor XC-MINI Update(2018.04.19)
bug fix:HU43,HU56R,HU64,HU101
modify:HU43,HU56R use clamp M2-D
V5.0.3
add key:HU162T-9,HU162T-10
fix some bug
modify(for India version)
HondaCycles(India)/activa 3G
Modify (for India version)
Mahindra(India)/Bolero Mahindra(India)/XYLO&SCORP10 HondaCycles(India)/activa 3G Hero(India)/Splendor
Condor XC-MINI or Xhorse Tools Update Tips When use Xhorse Update Kit Software
After you connect device with computer,and use xhorse upgrade kit software to update your xhorse tool,please click "find device" firstly,confirm software can recogize your device firstly,then process updating.Thanks.
If any questions,please feel free to contact us:

Email: sales@xhorsevvdi.com

Skype: xhorsevvdi.com
Whatsapp:+86-13983756354

How to use Condor XC-MINI Cut New VW HU162T(9/10cuts)?

Condor XC-MINI Add Key:HU162T,and here we will introduce instruction about how to use condor mini key cutting machine cut New VW HU162T(9/10cuts) key.

1. Start condor mini key cutting machine. Select "Cut by bitting" then select the key blank "HU162t-9"

2. Select "Key Decode" or enter 9 bittings directly, follow machine prompt to decode or cutting keys.
It shows Clamp M2 and position B.



3.After 9 bittings cut OK,back to "Select key type" select 3 cuts to decode or enter bittings for left/right sides.Follow machine prompt use side D,require an extra blank to tight the cutting key.


original:How to use Condor XC-MINI Cut New VW HU162T(9/10cuts)?

New released Xhorse Condor XC-Mini Plus Key Cutting Machine

Xhorse condor XC-MINI boot Photos

Xhorse condor XC-MINI boot images:



Condor xc-mini boot:

Condor xc-mini select key:

Condor xc-mini Select Car Maker:

Condor xc-mini cutting setting:

Condor xc-mini cut by bitting:

condor xc-mini history:

Condor xc-mini self test:

How to Solve VVDI Prog "chip needs to be cracked" problem?

VVDI Prog V4.6.9 software is used to fix a 2007 Audi Q5 J518 module. And checked connection diagram,follow your instructions to solder the MC9S12 cable to the board. When I try and use the software, it seems to connect with the MCU but than at the end it states "chip needs to be cracked." What does this mean? And how do I accomplish this?
And another similar problem is after read,it shows "Chip is crypt,this operation needs to decrypt"

Solution:
Please choose decrypt way to read.Then it will be solved.

 

This from Xhorse vvdi Official site:How to Solve VVDI Prog "chip needs to be cracked" problem?

How to use VVDI Prog and VVDI2 Program BMW X3 EWS4.4 2007?

VVDI PROG software add EWS4.X(ADAPTER) option in <4-IMMOBILIZER>-> (Need EWS4 ADAPTER).And this blog is about VVDI PROG and VVDI2 program 2007 year BMW X3.In the process,it will need,vvdi prog programmer,vvdi2,and vvdi prog ews4 adapter.
1.Read IC 2L86D with VVDI PROG and EWS4 adapter.


1.1.Choose IMMO BMW EWS4 in VVDI PROG software.

1.2.Click read ID.


1.3 Read and save file.


2.Use VVDI2 Program chip.
2.1 Choose transponder programmer software in VVDI2 software.

2.2 Check adding chip:7935 blank.

2.3 Choose "IMMO Data Tool",then choose detailed type:EURO BMW EWS4.

2.4 Load eeprom file.

2.5 Choose Key 4 as previous keys are used.Put chip into vvdi2 hole.And then make dealer key.

2.6 Make dealer key,and process successfully.

3.Test key on your car.

Condor XC 009 introduction on its nice features and small tool kits

Condor XC-009 key cutting machine introduction video with English subtitle:
https://www.facebook.com/xhorsevvdi/videos/1736706446388735/
This is Xhorse Condor XC-009 manual key cutting machine.

I will introduce Condor XC-009 features.
Firstly, this is a rotary handle, you can turn the handle or pull out the small Crank to operate as you like.

Next is to reset the external power. You can use the vehicle 12V power supply to charge.

This is power supply port position.

You can also use the 220V external power supply to convert 12V, then plug into the power port.

This is the position of internal battery, after turn on the switch, it will display the battery capacity.

Condor XC-009 has a standing feature that is it's clamp is 40 and the user can switch according to your key slot type, and it's very easy to switch feel just like a fish in water.

Another nice feature is the distance between the two clamps is large enough, it's perfect to match the folding key, you can stuck in the key on the clamp instead of dismantling the metal keys, even though there are smart keys on the two sides, it's also very easy to use, you can completely cut the whole key.

So XC-009 is very nice for our locksmith.
XC-009 has a user-friendly handle, you will feel good when going back and forth.

This is a measuring tool.

This measuring tool is for adjusting the height.

Next is to see XC-009 2 small tool kits.

There are 2 small tool kits used to stuck the key position.

This brush is used to clean the dust after cutting the key.

The wrench and the round metal stick is used to change the blade.
Insert the metal stick to find out the position, then use the wrench to disassemble the blade.

The scythe is to smooth the key after cutting complete.

The left small tool kits are used to adjust and disassemble the screws.

XC-009 weights 10KG ( 22 LB), so it's very easy to take with you where you go.

Okay, please remember Xhorse Condor XC-009 manual key cutting machine.

Thanks.
www.xhorsevvdi.com