VVDI Prog read Volvo V50 9S12DG256 0L01Y

Thread: vvdi prog is able to read volvo v50 keyless entry module? Chip is 9s12dg256 0L01Y
Yes. The 9s12dg256 chip is listed. And 0L01Y is the same MCU as in Benz EZS/EIS units....W906 for example...try this
volvo v50 keyless entry module:

Chip 9s12dg256 on the vvdi prog list:

MC9S12 Reflash Cable you shoul have to work with VVDI Prog:
It’s aimed to Read & Write MC9S08, MC9S12 series chips
Solder the line on pin of chips before reading & writing chips

Notes:
(1) Please check all connection lines, ensure correct and reliable
connection
(2) Please Don’t lengthen CLK and GND-C line, maybe lead to read data failure

Motorola mc9s12dg256 secured chip wiring diagram:

Motorola mc9s12dg256 unsecured chip wiring diagram:

Xhorse Vvdi prog read Volvo 0L01Y: (same as MB EIS 0L01Y)
Step1. Open VVDI PROG software. Choose “Type”, “Brand” and “Chip” then Click on “Connection diagram”.

You can see the wiring diagram of EIS 0L01Y

Step2. Click on “Read ID” then “Read”. VVDI PROG read Mercedes W906 EIS 0L01Y OK!

Click on “Save” and name the file “ee”.

Step3. Click on “Flash” then “New” then “Read”.

Click “Save” and name the file “flash”.

Step4. Click on “Erase” and “Yes” to confirm that.

After that, Click on “Check Blank”.

Step5. Click on “Write” and “Yes” to confirm that.

wait about 3 minutes and Xhorse VVDI PROG write Mercedes W906 Sprinter EIS 0L01Y successfully!

Click “Verify” as the last step to check and things done!

VVDI MB Tool Password Calculation Can't Find Password Error

VVDI MB Tool Power Adapter used with VVDI MB BGA Tool to collect W204, W207 all lost, only need 18 minutes.If not use the Mercedes-Benz power adapter will take about 150 minutes. VVDI MB power connector will help you save nearly 2 hours.

And when vvdi mb tool do password calculation online
Choose Mode and Chassis W204 W207,second step is data acquisition
Connect device>>MB Power Adapter>>OBD Line>>Cable OBD
Connect IR adapter to VVDI MB Tool
Data acquisition
Then update date and acquisition data
Press "Query result" to get key password
But it got error "can't find password from file,please use "data acquistion" for new data!

Solution:
The result is failed,please get new data and try again.Just like the error information shows.
And please confirm your tokens.This process will need tokens,if you do have tokens,it will ask payed tokens in the error message.
If it is successful,it will display like following:

VVDI KEY TOOL V2.0.6 Updated (08.2017)

VVDI KEY TOOL the latest version V2.0.6 is released on 08/28/2017.
Use Online loader app
N/America(NA),Europe(EU),Middle East(ME),Southeast Asia(SE)
1.transponder clone
+add BMW motorbike ID70-4D 80bits offline cloning function
+add wireless remote emulate as a coil for data collection on 46 cloning
*fix parts of ID33 ID44 indentfication problem
*fix EXCELLE ID70 indentfication problem
*fix Subaru ID62 indentfication problem
2.remote clone
*fix parts of devices shutdown problem
*modify draworder of HCS clone data display
*modify draworder of HCS edit data display
*fix ax5326 LX918 etc.,parts of cloning incompatible problem
3.remote prepare
+add status of prepare remote get bonus points reminding function
*modify parts of remote data
*fix pre-active remote code display problem
4.remote renew(*refer to latest diagram V2.0 version*)
+add renew GreatWall H2 smart key
+add renew Mazda Atenza CX-5 smart key
+add renew Hyundai SVI_MDFGE03 smart key
+add renew Hyundai MP13L_12 smart key
+add renew Buick A2C53360923 remote
+add renew Nissan-CWTWB1U825 smart key
*fix Nissan Hitag3/AES renew failed problem
*fix Chrysler cannot renew problem
*fix parts of key renew unstable problem

Free Download:
VVDI Key Tool Best Price
VVDI Key Tool User Manual
VVDI Key Tool Unlock Wring Diagram
VVDI Key Tool Remote Support List
VVDI Key Tool V2.3.9 Update Tool Software

How to use VVDI2 program BMW FEM/BDC keys

VVDI2 4.3.0 now is verified to work no issues with the BMW FEM/BDC system.Here is simple guide about VVDI2 Program BMW FEM/BDC Keys.
If you have condor mini key cutting machine,provide your serial number,add VVDI2 BMW FEM/BDC authorization price is 600USD.If without condor key cutting price is 800USD.
VVDI2 BMW 4.3.0 Learn keys & Erase keys to the BMW FEM/BDC system

step 1:
1. read FEM/BDC coding via OBDII or on the bench
2. you'd better not close this window after starting this procedurestep 2:
1. open FEM/BDC shell, find out where the 95128/95256 chip is, read EEPROM dump via BDM programmer
2. load original EEPROM dump and save special EEPROM dump, write special EEPROM dump back to the 95128/95256 chip
3. restore FEM/BDC shell, provide -12v and connect it via OBDstep 3:
1. this operation requires connecting FEM/BDC on the bench, and make sure you finish step 1 ans step 2
2. provide +12v to FEM.BDC and connect it via OBDstep 4:
1. open FEM/BDC shell, write original EEPROM dump (read step 2) back to the 95128/95256 chip
2. restore FEM/BDC shell and connect it via OBDstep 5:
loading coding file (read step 1), write to FEM/BDC via OBDII, finish FEM/BDC programming

VVDI2 - BMW FEM/BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding
Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "BMW E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-BMW
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.（FEM 95128 chip, BDC 95256 chip）usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.


Reset KM to the BMW FEM/BDC system
Have backup coding, restore coding of the FEM/BDC system
Attention: FEM/BDC Key Learn is an option function, it require buy license or exchange with bonus points. Contact your dealer @xhorsevvdi.com for help!

1.VVDI2 BMW FEM/BDC Function Authorization Service:
2.VVDI2 BMW FEM/BDC Function Authorization Service For Condor Cutter Only:

original article:  How to use VVDI2 program BMW FEM/BDC keys

How to use VVDI2 program BMW FEM/BDC keys

VVDI2 4.3.0 now is verified to work no issues with the BMW FEM/BDC system.
VVDI2 BMW 4.3.0 can:
Learn keys & Erase keys to the BMW FEM/BDC system


Reset KM to the BMW FEM/BDC system
Have backup coding, restore coding of the FEM/BDC system
Attention: FEM/BDC Key Learn is an option function, it require buy license or exchange with bonus points. Contact your dealer @xhorsevvdi.com for help!

Condor XC-Mini with InstaCode Certification Work via Bluetooth

Condor XC MINI key cutting machine from last year is with InstaCode Certification,which is verified to work with InstaCode LIVE by Bluetooth.

Supports the latest version of database, can be online updated from InstaCode LIVE server. Also, one year FREE authorization for InstaCode LIVE.

InstaCode LIVE System Requirements

Android

• Operating system: Android 4.0 or higher
• Processor: ARMv7-based CPU, 1Ghz or higher recommended
• Internet: WiFi/3G/4G data connection required

iOS

• Operating system: iOS 8 or higher
• Internet: WiFi/3G/4G data connection required

PC

The minimum computer hardware requirements are:

• Pentium CPU
• 1GB of free (available) RAM
• 350MB of available Hard Disk Drive space
• Mouse or other pointing device
• One of: Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2008 or Windows Server 2012.
• The minimum display resolution required is 1024 x 576 (Higher display is required for complete display of some Dimple and Bit series) with 16 bit colour (sometimes called 64K colors or 65536 colours) or greater.
• Internet Explorer 7 or later.

A Windows supported printer is optional.
If you run several applications simultaneously you will require more RAM.

InstaCode LIVE on PC, Android/ iOS Phone

Both General and Auto Code have:	PC	Android	iOS
Search Options
Code number	√	√	√
Manufacture	√	√	√
Model and year	√	√	√
Key blank	√	√	√
Card	√	√	√
Lock type	√	√	√
Key type	√	√	√
ISN (InstaCode Serial Number)	√	√	√
Search on any combination of criteria	√	√	√
Other Features
Number of different key blank manufacturers	52	52	52
View key blank pictures & profiles	√	√	√
Define preferred Key blanks manufacturer	√
Graphical layout which displays the key blank	√	√	√
Intuitive user interface	√	√	√
Live updates from the Internet	√	√	√
Add your own code series	√
Make your own depth/space cards	√
Master Keying Module included	√
Build a grand master keying system and download it to your machine	√
Password protection available	√
Sort key blanks into desired order for display	√
Shows picture of cut key	√	√	√
Stores key hook for each key blank	√
Stores client information	√	√	√
Stores user notes against each series	√	√	2017
Supports laser and plunge cut keys	√	√	√
Your choice of display units (inches or mm)	√	√	√
Select manufacturer	√	√	√
Print Ilco Universal II	√
Print a whole series	√
Print the current code and it’s data	√
Print Transponder	√
Configurable printer and printer paper tray	√
Key Machines (Direct communication)
Keyline – Bianchi 883 Transponder key reader/writer	√
Keyline – Bianchi 993 Power Lynx	√
Keyline – Bianchi Versa	√
Keyline – Bianchi 994-Laser	√
Barnes BD Laser	√
Silca UnoCode – Original	√
Silca Quattrocode with speed control	√
Silca Triax	√
Silca Futura	√	√	√
Ilco UltraCode	√
ITL – 9000	√
CodeMax	√
JMA ProCode	√
ECM 200	√
Information for manual key machines
Ilco Universal II	√	√	√
HPC 1200 Blitz	√	√	√
HPC Punch	√	√	√
Curtis	√	√	√
Framon	√	√	√
A1	√	√	√
Add-on Options	PC	Android	iOS
Find bitting	√	√	√
— Find partial bitting in associated series	√	√	√
— Progression chart to eliminate wastage (cutting tree)	√	√	√
— Queue of keys to be cut (both machines and printouts)	√
— Lock wafer positions	√	√	√
— Wafer swapper	√	√	√
Vehicle opening instructions	√	√	√
— Complete ASP catalogue featuring colour picture	√
Transponder programming instructions	√	√	√
— Complete ASP catalogue featuring colour picture	√
— Remote programming instructions	√	√	√
— Airbag safety instructions	√	√	√

Instacode Software is not from XhorseVVDI.
Instacode software description in this blog is original Credits to http://www.instacodelive.com/

VVDI2 BMW Key Programmer Support Unlock Key

VVDI2 BMW main functions are: Read/Write EWS, read CAS information，Read/Write CAS EEPROM,
Read/Write KM stored in CAS, synchronization DME with CAS, synchronization CAS with
ELV, Key Learn(immo)，File Make Key, Unlock Key, File Change KM, CAS Repair etc

Some customers want to know whether it is OK to program old BMW key via VVDI2?The answer is Yes.You can use VVDI2 to renew and erase old key,then program it.

1.VVDI2 BMW Unlock Function:
Support unlock key for CAS1/CAS2/CAS3/CAS3+ prepared by VVDI2
Support load key info to unlock key.
Support load CAS1/CAS2/CAS3/CAS3+ eeprom to unlock key
Attention:After CAS4 key made successfully,don't support unlock

2.Attention About unlock keyless key:
File make key:Keyless key made by add key with working key don't support unlock OBD Key Learn>Prepare dealer key with programmer: Keyless key made by add key with working key don't support unlock.

3.VVDI2 BMW Unlock Menu