Xhorse VVDI 2

显示标签为“vvdi ii”的博文。显示所有博文

2019年1月3日星期四

Why choose VVDI2 full authorization instead of VVDI2 basic?

This post begins with a user's complaint with the Xhorse VVDI2 Promotion Activity 4th and 5th for Christmas and New Year was stopped and had no chance to buy one. In the next paragraph, he is advised to have one VVDI2 full authorization Version which cost much less than before.
A user's complaint story......
See that Xhorse team still have it there but nobody sells this anymore. They say it`s valid until 25 February but don`t know what to say. I have ordered from xxx.com but they said it was in stock vvdi2 at 1219 usd, made payment, sent proof of payment, after that they say it`s no problem, they have it in stock, after two days I receive a message from them saying that it`s not in stock anymore. Did not get my money back yet. After that I think, ok, I'm going to order vvdi2 basic from my country and activate it a few days later when vvdi2 comes with the courier and my money back from xxx.
He can have a better choice:
today better is to buy 1,834.56€ full Authorization VVDI
http://www.xhorsevvdi.com/wholesale/xhorse-vvdi2-full-authorization.html
VVDI2 full version contains all of the following authorizations:
VV-01 VAG 4th immobilizer
VV-02 VAG 5th immobilizer
VV-03 VAG Copy 48 transponder by OBDII
VV-04 ID48 96Bit Copy
VV-05 VAG MQB Immobilizer
VB-01 BMW OBD
VB-02 BMW CAS4
VB-03 FEM/BDC Function
VP-01 Porsche immo data tool
VPSA-01 PSA
VK-01 Transponder Programmer
VJ-01 Passthru J2534
V7-01 Prepare Toyota H Chip
extra pay 800€ but full function activated
$300 fvdi 2018 , $145 Super Vag 2016.3 ( clone ) , ImmoPlusLoader 13.6 + $99 FVDI
VW 4th & 5th vvdi2 is TO MUCH expensive , NOW better choice FULL Authorization now.

Hope it helps.
Edit by xhorsevvdi.com:Why choose VVDI2 full authorization instead of VVDI2 basic?

2018年12月24日星期一

(Quoted) 5JA920840J SW0709 NEC+24C64 Login with RESET PIN

By following the below parts, your VVDI2 can login cluster.
Skoda Fabia, after 2015 PQ25 5JA920840J SW0709 , VW Amarok 2H0920871A SW0805

Please know, we always recommend to read & save EPP before you start.
RESET PIN is a GND signal , no need any rezistors or special line
With RESET PIN no need prepare EPP to Service Mode to login cluster if "all key lost"
1) Switch OFF power (Kl15 & KL30) , with KL15 OFF it will not work
2) Find a RESET PIN near CPU

3) Switch OFF Power Supply (KL30 & Kl15)

4) Connect GND to RESET PIN and hold

5) Select proper cluster type in VVDI

6) Switch ON power supply (KL15 & KL30)

7) Remove RESET PIN (you can remove RESET PIN after few second when you switch ON Power
8) Select READ IMMO or EPP and Select LOGIN METODE 2 (you can also try with other metode if this one faile)

9) VVDI2 can login cluster now

this is from xhorsevvdi.com:(Quoted) 5JA920840J SW0709 NEC+24C64 Login with RESET PIN

2018年6月26日星期二

BMW CAS3 key programming by VVDI2 FULL or VVDI2 BMW both OK

Do you want to know how to program a new BMW dealer key CAS3/CAS3+ by VVDI2? Both VVDI2 FULL and VVDI2 BMW are tested OK! Below a step-by-step guide for checking.
BMW key programming, choose VVDI2 FULL or VVDI2 BMW?
Here is a VVDI2 user opinion:
I voted for VVDI2 Full for VW/Audi/BMW/Porsche. Because I meet most VAG and BMW car key programming in daily work. And VVDI2 FULL has all authorization incl. VAG 5th IMMO, no need to pay anymore in future!
I bought it for $2045 free delivery at xhorsevvdi.com, price is good.
But if you need a lower price VVDI2 and just focus on BMW, I know there is another option: VVDI2 BMW Cas3 basic version.
How to program BMW CAS3 key by VVDI2 key programmer?
https://youtu.be/rmr_IBrQlOw
Below I will talk about is the procedure VVDI2 make BMW key:
First connect VVDI2 with car and use the old key to turn ignition on. Open the software when I click Connect it automatically show me car information and “connect OK”.

Click Key Learn

Click Get Key Info and I see two options: one add key, one lost all key. I choose Add Key then NEXT.

And it says the dealer key should be taken away. So pull out the old key and I click OK.

It read out all key information. I click Save Key Info below to save the original key data.

Next I choose KeyID3 and click Prepare dealer key with programmer.

It asks me to put new key into programmer. So I put the new key into VVDI2 coil.

Then it asks if the key has keyless, I say no.

New key is made but locked. So as the tips I use the key to start car.

Yes. Car starts successfully as I expected!
My vvdi2 full version wins!

This is Edit by Xhorse vvdi:BMW CAS3 key programming by VVDI2 FULL or VVDI2 BMW both OK

2018年3月9日星期五

MQB VW is ready with VVDI2 xhorse? Is it true?

NEWS! the first and the lonely in the world, MQB VW is ready, VVDI 2 Xhorse
Really wanna try that?
When it will be???
Xhorse support answer: First we will update the mileage correction function. For the security reason maybe we will produce Xhorse keys support new function, thinking about this currently.
Question: What is that? MQB ?

Answer: Golf 7 for example has the new system called MQB.
After hearing this news, what the locksmiths react?
this will be biggest news to hit the key side if true in a long time
if does the keys that is
not just mileage
1.Full Set Lock with Keys of VW MQB
2.Full Set Lock with Keys of Skoda MQB
Any new update, www.xhorsevvdi.com will notice. Please wait.

2018年2月7日星期三

VVDI2 full version got error when update BMW(Solved)

VVDI2 full version got error when update BMW shown as below.

Attention: VVDI2 database file released newest version V1.0.0. Please update your software with VVDI2 update tool.
VVDI2 database file lower version may cause some function failed. We strongly suggest you update to latest database file!
Here xhorsevvdi offer solution.
Download BMW configuration file on Mega
https://mega.nz/#!yp5V0LgC!Jmne3SOWP01UgzGmuUMKMWHeiy1uGFBq83T50k2-LhU
Install it.
The problem will be solved.
Good luck!
If you have any more question, welcome contact:
email: sales@xhorsevvdi.com
Skype: xhorsevvdi.com
Whatsapp: 0086-13983756354

2017年11月13日星期一

VVDI 2 has problem connection to CAS2 (Solved)

Question:
I have a problem with my brand new VVDI2. Today I wanted to add a key to a 2006, 1 series, E87, with CAS2. Nothing complicated, I taught, let's get my mew VVDI2 tool and do this verry simple job. So, I connected the VVDI2 to the OBD2 port, inserted the allready existing key into the key slot, turned ignition on and clicked Connect on my VVDI2 4.7.0 app. I vas surprised to get "AutoDetect Failed!" error so I checked connections and clicked Connect again, same error. Than I taught maybe it is not able to detect the CAS, no big deal, so I selected the "OBD2 KWP-E6X,E9X........" and clicked Connect again, this time it was "Readin Data Failed!", and so on for every protocol taht I've selected. Than I went ahead and undated the software and firmware to version 4.7.5 that is the last version, but no change. Long story short my VVDI2 can't connect to CAS2, did anyone have this problem and can help me resolve it? I'm adding 2 photos of what is happening! Thank you verry much!!!

Check ftdi drivers and correct, installed manually from VVDI2 folder!
Answer:
Cs calculation on edc17 working again. I made today a cady 2011 key. Spare key.And it worked just perfect. So. try again.
recommend 2011 driver version 2.8.14.0.
Question:
I think the prob is micronas 2007 dash, can someone test?
Answer:
Micronas dash make Dealer key, add key direct to Immo block, ,key has to be in programmer do add it to immo block , when it done put key in car , turn ignition on and reset dash , , never had problem with it, just did one 2 days ago.
Question:
Thank you!!!What about a3 2004 (8p), how to prepare key? Because is not by Audi 4th immobilizer system and in key learn if you use the option of prepare all keys lost...
Answer:
you will need to prepare an iD48 with AUDI CAN and prepare with 7th byte, everything you can do with VVDI2.
And then with the PINCODe just go to KEY LEARN - KEY LEARN and all good.
Question:
How to prepare it by 7th byte? I don't find chance...
Answer:
Other Key Tool

2017年8月8日星期二

How to use VVDI2 Full for BMW key programming

FYI: How to do VVDI2 BMW key programming (when all keys are lost)
VVDI2 BMW:

VVDI2 FULL kit:

VVDI2 Price:
Best price at xhorsevvdi.com. You will get what you pay for.
VVDI2 software download: vvdi2 v4.1.0
https://mega.nz/#!SgJBDaAK!0LZHIrnnUoPKspT680Vh3YGFF_sGBIf378yU8RZ r0VA
VVDI2 BMW Abilities:
EEPROM/KM/Synchronization Codes (OBD)
Read EEPROM / Write EEPROM
Read KM / Write KM
Synchronize DME-CAS, CAS-ELV
Key Learn
Get Key Info
Write Key Info
Load Key Info / Save Key Info
Prepare dealer key with programmer
Prepare dealer key with ignition switch
Add key
Program Key Info
Repair Keyless Key
Enable Key / Disable Key
Clear DTC / Clear Shadow
File Make Key
EWS1/EWS2/EWS3/EWS4
CAS1/CAS2/CAS3/CAS3+/CAS4
Unlock Key
Unlock with key info file
Unlock with CAS1/CAS2/CAS3/CAS3+ EEPROM
File Change KM
EWS3/EWS4
CAS1/CAS2/CAS3/CAS3+ CAS4
Cluster (E Series): M35080 EEPROM dump
Cluster (F Series)
CAS Repair
CAS1(0K50E) OBDII Repair
ISTAP4* Version OBDII Repair
Case: VVDI2 BMW Key Programming:
1.Start VVDI2 Softwareand choose BMW brand.Connect well VVDI2 BMW with your car and computer.
2.Choose the detailed car type,click on“Get Key Info”.

3.Then it shows:Add key:You should insert a working key into ignition,and connect device with car before continue.Click on “Next”.

4.The dealer key should be taken away from ignition switch.If key is keyless,pleae move it out of car.
If there is not key in ignition,continue anyway.Press OK to continue.

5.Please use “Save Key info” to save save the original key informaiton.

6.Choose Key 4,put the key into VVDI2.

7.Click on “Prepare dealer key with programmer”

8.Click on OK to continue.

9.Please choose “Add Key”,please put new key into VVDI2 key Prorammer.
Is the new key keyless.If have press yes,els NO.

10.Writing data success.

Done!
VVDI2 BMW Review:
2005 BMW E87 CAS3: success
2006 BMW E90 CAS3: success
2003 BMW E60 CAS2: success
2008 bmw m6: success
I tested my vvdi2 on 2008 bmw m6 today. It worked flawlessly and was a bit quicker than multitool.
2010 bmw X5: success
I did a perfect job on 2010 bmw X5 with ISTAP today. I downgraded CAS ( I backed up eeprom with xprog first) and then retrieved key info OK. Adding key was a brieze after that. Cleard all errors, sinchronized ELV. DONE
2012 bmw f10: success
Hi i yesterday have bmw f10 2012 year ,read cas4+, change, write back all ok work .happy 100%

2017年6月5日星期一

VVDI2 Basic Module Free With Volkswagen B5 Remote Key 10pcs

VVDI2 Basic Version is in stock now,and to repay our customers,VVDI2 basic now is free with Volkswagen B5 Type Remote Key 3Buttons Board for VVDI2 Mini Remote Programmer 10pcs/lot and Free with VVDI2 Mini Remote Programmer in the package.Hurry to get VVDI2 basic function now.

1.How to choose VVDI2 Key Programmer?

VVDI2 Key Programmer Comparsion:

Item number	Full version(SV86)	Basic+VAG(SV86-B)	Basic(SV86-C) Stops producing	Basic+BMW(SV86-D)
Price	2299USD	1550USD	499USD	1079USD
Basic Functions	√	√	√	√
VW	√	√	ｘ	ｘ
BMW	√	ｘ	ｘ	√
Porsche	√	√	ｘ	ｘ
5th AUDI Authorization	√	√	+320USD (SV86-2)	ｘ
BMW OBD Authorization	√	+720USD (SV86-3)	+720USD (SV86-3)	√
BMW CAS4 + Authorization	√	+260USD (SV86-4)	+260USD (SV86-4)	+260USD (SV86-4)

2.What you need atttention for VVDI2 Basic

1. Can't pay to open authorization for BMW,can only get authorization for VW (Check SV86-5)
2. If you want to open VVDI2 BMW CAS4+ Authorization or VVDI2 BMW OBD Authorization, please buy SV86-D or SV86-B.

3.VVDI2 Basic Package list:

1. VVDI 2 Main Interface
2. 5th BDM Programmer
3. OBD2 Cable
4. CAS Plug (Extra plug,need buy from dealer)
5. Remote Programmer(It includes in package now)

6. USB Cable

7. Volkswagen B5 Type Remote Key 3Buttons Board for VVDI2 Mini Remote Programmer 10pcs/lot

2017年6月1日星期四

How to use VVDI2 Read Audi EZS EEPROM(J518) via OBD?

VVDI2 commander Programmer is professional key programmer,especially for BMW,VAG car models.VVDI2 newest version V4.2.1 add Audi A6L, A7, A8L, Touareg lost all key function.

Here we will introduce some simple steps about Xhorse VVDI2 Key Programmer Read Audi EZS EEPROM(J518) and Read VIN via OBD.