Xhorse condor Mini cuts VW HU162T(9) without new clamp

Xhorse condor Mini is tested ok to cut VW HU162T(9) successfully!
No need new clamp (Thumb UP)
Tested by Xhorse Company engineer.
Pictures mean a lot:

Xhorse condor Mini at good price is suggested more than any other on this site:
http://www.xhorsevvdi.com/wholesale/ikeycutter-condor-xc-mini-key-cutting-machine.html 

Maybe you are interested in:
Xhorse condor Mini test reports (Search "Condor" on this blog).

Condor XC-MINI Benz W204 2010- Key Cutting Review

V5.1.7 Xhorse IKeycutter CONDOR XC-MINI key cutting machine can support multi-brands of car key types.And for Benz W204 2010- year,our customer give us feedback he use Key Dupliate Way to cut new keys,but it cut wrong.

Suggestion from Engineer:
Please choose cut by bitting way,and choose Benz HU64

You can check which one you need choose from the key type

Please Input the tooth number Which obtained by the Lishi two-in-one toolto the Condor XC-MINI cutting machine through the tooth profile processing interface

How to change the built-in battery of Condor XC-MINI?

Rechargeable battery of XC-Mini is new accessory for Condor XC-MINI key cutting machine,you can buy the chargeable battery and replace it in Condor MINI,then your condor mini can have bulit-in battery.Here is the guide how to change Condor XC-MINI built-in battery.

Remark: please follow the procedure to operation in case of damage the Mainboard ,do not connect the power during operation
1 , Take off those 4 screws like the picture show
Attention : For your security, do not connect the power in next steps.

2 , Push the motor inside and hold the white buckle then take out the emergency-stop module like the picture show

3 , Loose the connection of position 11 &12 like picture show

4 , Use a screw to make the connection those two cables what are from position 11 & 12 like the picture show ,and use the acetate tape fix the connection well

5, Fix the cable 6 to the position 12 , cable 7 for position 11 , then put the emergency –stop module back and fix it well

6, Take off those 2 screws like picture show

7, Turn over the Condor XC-MINI and take off the foot rubber

8, Take out the Power-board and disconnect all cables like picture show

Original Power interface ( 220V)
Battery charger & display module

9, Use the battery charger & display module to replace the original power interface like picture show

10 , Fix the cable into the socket according the number between the cable and socket ,make sure every cable will be fix well

11, Fix the cable of 24V and cable of GND in the right position like picture show

12, Connection the power like picture show then put back the Mainboard and fix it well

13, Fix the all cables after put back the mainboard , the mainboard should be in fixed very solid ,manage the cables again if not , then fix the foot rubber and screws

14, Fix those screws like picture show

15 , The screen , LED , display of battery charger should be on after you press the emergency – stop button , if not ,check the connection again

Remark : electricity volume will be show by the green light , the LED that is mark ‘’ CHRG ‘’ should be green if it is charged , it will be red during charging0

Edit by http://www.xhorsevvdi.com/ :How to change the built-in battery of Condor XC-MINI?

Xhorse iKeycutter CONDOR XC-MINI Key Cutting Machine Review

iKeycutter CONDOR XC-MINI original Xhorse key cutting tool,most powerful and competitive auto key cutting machine is with built-in Database, can easily find key information and Software supports online-update at xhorsevvdi.com.

1.iKeycutter CONDOR XC-MINI Screen

 

2.CONDOR XC-MINI Fixture

     

3.XC-MINI Component:

4.XC-MINI CONDOR Structure

 

Edit by Xhorse vvdi2:  Xhorse iKeycutter CONDOR XC-MINI Key Cutting Machine Review

Xhorse have revised Condor XC Mini va2 for PSA problem...

I had problem today with xhorse condor xc mini cutting VA2 for PSA. See the photo. I cut F C A A E A. The problem is at 1055-790. It mustn't be a straight line at the bottom.
Condor mini KM03 cuts a straight line for the top layer then cuts correctly at the deeper layer. The cutting curve isn't the same for the 1 mm depth. It looks like a worn key after cutting. I ask the developers to check it.

It's a common VA2 for PSA. It isn't custom. I attached a high resolution photo. If you see that area what I mentioned in my previous post you can see two different curve.

1. straight line - it is the top layer (low depth)
2. correct curve - lower layer (high dept up to 1mm)

The straight line cut the top of the correct curve.
Finally, Xhorse support have revised VA2 for PSA problem. Just need to update when the Condor XC Mini version is ready(it's processing).

 original:Xhorse have revised Condor XC Mini va2 for PSA problem

How to use Condor XC-MINI Cut Toyota TOY43MV Via Find Bitting Way?

mini condor key cutting machine Key Cutting Machine can support cut key via key duplication way:decode original key and cut.
Or key database menu,cut by code in door switch/key tag/barcode.

And today we will introduce Condor XC-MINI Cut Toyota TOY43MV Via Find Bitting Way
1.Use Lishi tool to decode bitting from door lock.

Some car bitting qualities in door lock are not same as ignition switch, then you can use "Find Bitting".

Toyota car:there are 8 bitting in door switch and 10 bittings in ignition switch.
Bitting number 1-8 find by decode with Lishi tool.
Bitting number 9-10 find by looking in ignition switch with Magnifier tool.And you can use easy way:Find bitting menu to find bitting number 9-10.


Find bitting,choose Toyota TOY43MV Master in the menu.


Fill bitting number 1-8(Find from door lock).

Find bitting in database.And it shows possible bitting result.


Key1:Have 5 bitting, try to cut from top to buttom.

After try key1 but if can not turn switch then try key2. After cut key welll,you can test it.