How to fix the shell with panic of Xhorse Benz VVDI BE PCB

XHORSE VVDI BE Key Pro For Benz XNBZ01CH Remote Key Chip Improved Version is free with 200 points,which can be exchange to one BGA token,315/433mhz both supported,you can switch by yourself.
If the Red button key shell with Xhorse Benz Key pcb may be a little rasied just like below pic shows,and you can fix like the following steps to lower it,it is easy fix:

1.Open the key shell.


2.This Panic button place is a little bit higher.

3.Cut down,do not take much.

5.Put back the Xhorse Benz PCB.
Original:How to fix the shell with panic of Xhorse Benz VVDI BE PCB

YH Mercedes Benz 315MHZ/433MHZ Key Support Work with VVDI MB Tool

VVDI MB BGA Tool Benz key programmer which is designed by Xhorse,except xhorse original tools,we also recommend original YANHUA Mercedes Benz 315MHZ/433MHZ Key to work with VVDI MB Tool.

Top 5 reasons to get YH Mercedes Benz 315MHZ/433MHZ Key:

1. Applicable List: 705 Moto(1997-2000) NEC(2001-2005) NEC(2006-2010) BGA(after 2011)

2. Programmed by:All kinds of MB key programmer such as Digimaster-III ,CKM100, VVDI MB TOOL, AK500 , MBE MB-KEY OBD2, NEC-57 MB-PRO,Etc.
 
3. Frequency: 315MHZ/433MHZ

4. Advantage: Support repeated infrared reading and writing. Steady quality same as original one.

5.This key is reusable,and it can write again directly

YH Benz Key PCB Board Display:

 

 www.xhorsevvdi.com all rights reserved, Original Article url:YH Mercedes Benz 315MHZ/433MHZ Key Support Work with VVDI MB Tool